CDNWiki - Diff: CyberLeo/Scraps/POGO-P21

Note: You are viewing an old version of this page. View the current version.

Differences between version 14 and previous revision of CyberLeo/Scraps/POGO-P21.

Other diffs: Previous Major Revision, Previous Author

Newer page:	version 14	Last edited on Monday, 15 October 2012 10:07:02	by CyberLeo	Revert
Older page:	version 13	Last edited on Sunday, 30 September 2012 16:37:55	by CyberLeo	Revert

@@ -1,46 +1,71 @@

-Outside:

-

-* 4x USB2.0

-* 1x Gigabit Ethernet

-

-Inside:

-

-* OXNAS 7820 ARMv6 dual-core 700MHz

-* 128MB RAM

-* 128MB NAND flash

-* 1x SATA port, no PMP

-* JTAG is port HD5, but has no header: http://archlinuxarm.org/forum/viewtopic.php?f=29&t=1118#p6256

-** Need pinout!

-* Port J3 is most likely a serial port

-** http://web.archive.org/web/20101128072832/http://plugapps.com/images/f/fd/Pogoplug_Pro_Serial_Pinout.jpeg

-** http://search.digikey.com/us/en/products/51021-0400/WM1722-ND/242844?wt.mc_id=Dxn_US_T091_Catlink

-** http://search.digikey.com/us/en/products/TTL-232R-3V3-WE/768-1016-ND/1836394

-* Except the above doesn't fit. This should:

-** http://www.digikey.com/product-detail/en/SWR201-NRTN-S04-SA-WH/S9457-ND/2769602

-** http://www.digikey.com/product-detail/en/SWH201-NULN-S04-UU-WH/S9406-ND/2411374

-

-http://web.archive.org/web/20101221152953/http://plugapps.com/index.php5?title=Hardware:_Pogoplug_Pro

-

-Software:

-

-http://www.pogoplugged.com/forum/thread/14902/Pogoplug-Pro-U-Boot-Kernel-Sources/#11255

-

-http://pogoplug.com/opensource

-

-http://archlinuxarm.org/ (Platforms -> ARMv6 -> ~PogoPlug Pro/Video/V3)

-

-https://github.com/WarheadsSE/OX820-3.1-Linux

-

-Original images?:

-

-http://archlinuxarm.org/mirror/ce/

-

-http://download.pogoplug.com/opensource/#PRO

-

-SATA boot:

-

-http://archlinuxarm.org/forum/viewtopic.php?f=29&t=2146

+Outside:

+

+* 4x USB2.0

+* 1x Gigabit Ethernet

+

+Inside:

+

+* OXNAS 7820 ARMv6 dual-core 700MHz

+* 128MB RAM

+* 128MB NAND flash

+* 1x SATA port, no PMP

+* JTAG is port HD5, but has no header: http://archlinuxarm.org/forum/viewtopic.php?f=29&t=1118#p6256

+** Need pinout!

+* Port J3 is most likely a serial port

+** http://web.archive.org/web/20101128072832/http://plugapps.com/images/f/fd/Pogoplug_Pro_Serial_Pinout.jpeg

+** http://search.digikey.com/us/en/products/51021-0400/WM1722-ND/242844?wt.mc_id=Dxn_US_T091_Catlink

+** http://search.digikey.com/us/en/products/TTL-232R-3V3-WE/768-1016-ND/1836394

+* Except the above doesn't fit. This should:

+** http://www.digikey.com/product-detail/en/SWR201-NRTN-S04-SA-WH/S9457-ND/2769602

+** http://www.digikey.com/product-detail/en/SWH201-NULN-S04-UU-WH/S9406-ND/2411374

+

+http://web.archive.org/web/20101221152953/http://plugapps.com/index.php5?title=Hardware:_Pogoplug_Pro

+

+Software:

+

+http://www.pogoplugged.com/forum/thread/14902/Pogoplug-Pro-U-Boot-Kernel-Sources/#11255

+

+http://pogoplug.com/opensource

+

+http://archlinuxarm.org/ (Platforms -> ARMv6 -> ~PogoPlug Pro/Video/V3)

+

+https://github.com/WarheadsSE/OX820-3.1-Linux

+

+Original images?:

+

+http://archlinuxarm.org/mirror/ce/

+

+http://download.pogoplug.com/opensource/#PRO

+

+SATA boot:

+

+http://archlinuxarm.org/forum/viewtopic.php?f=29&t=2146

+

+Stock boot parameters:

+<code brush="plain">

+/ # /usr/local/cloudengines/bin/blparam

+bootcmd=run boot_nand

+bootdelay=2

+baudrate=115200

+autoload=n

+netmask=255.255.0.0

+bootfile="uImage"

+kernflmode=s

+load_nand=nboot 60500000 0 200000

+load_nand2=nboot 60500000 0 800000

+boot=bootm 60500000

+boot_nand=run load_nand boot || run load_nand2 boot

+stdin=serial

+stdout=serial

+stderr=serial

+bootargs=root=ubi0:rootfs ubi.mtd=2,512 rootfstype=ubifs console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes

+ethaddr=see label on the bottom of the device

+cesvcid=see label on the bottom of the device, without hyphens

+ceboardver=PPV3

+serverip=192.168.1.20

+ipaddr=192.168.1.122

+</code>

version 14

Outside:

4x USB2.0
1x Gigabit Ethernet

Inside:

OXNAS 7820 ARMv6 dual-core 700MHz
128MB RAM
128MB NAND flash
1x SATA port, no PMP
JTAG is port HD5, but has no header: http://archlinuxarm.org/forum/viewtopic.php?f=29&t=1118#p6256
- Need pinout!
Port J3 is most likely a serial port
Except the above doesn't fit. This should:
- http://www.digikey.com/product-detail/en/SWR201-NRTN-S04-SA-WH/S9457-ND/2769602
- http://www.digikey.com/product-detail/en/SWH201-NULN-S04-UU-WH/S9406-ND/2411374

http://web.archive.org/web/20101221152953/http://plugapps.com/index.php5?title=Hardware:_Pogoplug_Pro

Software:

http://www.pogoplugged.com/forum/thread/14902/Pogoplug-Pro-U-Boot-Kernel-Sources/#11255

http://pogoplug.com/opensource

http://archlinuxarm.org/ (Platforms -> ARMv6 -> PogoPlug Pro/Video/V3)

https://github.com/WarheadsSE/OX820-3.1-Linux

Original images?:

http://archlinuxarm.org/mirror/ce/

http://download.pogoplug.com/opensource/#PRO

SATA boot:

http://archlinuxarm.org/forum/viewtopic.php?f=29&t=2146

Stock boot parameters:

/ # /usr/local/cloudengines/bin/blparam
bootcmd=run boot_nand
bootdelay=2
baudrate=115200
autoload=n
netmask=255.255.0.0
bootfile="uImage"
kernflmode=s
load_nand=nboot 60500000 0 200000
load_nand2=nboot 60500000 0 800000
boot=bootm 60500000
boot_nand=run load_nand boot || run load_nand2 boot
stdin=serial
stdout=serial
stderr=serial
bootargs=root=ubi0:rootfs ubi.mtd=2,512 rootfstype=ubifs console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes
ethaddr=see label on the bottom of the device
cesvcid=see label on the bottom of the device, without hyphens
ceboardver=PPV3
serverip=192.168.1.20
ipaddr=192.168.1.122