Differences between version 16 and previous revision of CyberLeo/Scraps/POGO-P21.
Other diffs: Previous Major Revision, Previous Author
| Newer page: | version 16 | Last edited on Saturday, 20 October 2012 18:48:55 | by CyberLeo | Revert |
| Older page: | version 15 | Last edited on Saturday, 20 October 2012 18:44:47 | by CyberLeo | Revert |
@@ -1,72 +1,72 @@
-Outside:
-
-* 4x USB2.0
-* 1x Gigabit Ethernet
-
-Inside:
-
-* OXNAS 7820 ARMv6 dual-core 700MHz
-* 128MB RAM
-* 128MB NAND flash
-* 1x SATA port, no PMP
-* JTAG is port HD5, but has no header: http://archlinuxarm.org/forum/viewtopic.php?f=29&t=1118#p6256
-** Need pinout!
-* Port J3 is most likely a serial port
-** http://web.archive.org/web/20101128072832/http://plugapps.com/images/f/fd/Pogoplug_Pro_Serial_Pinout.jpeg
-** http://search.digikey.com/us/en/products/51021-0400/WM1722-ND/242844?wt.mc_id=Dxn_US_T091_Catlink
-** http://search.digikey.com/us/en/products/TTL-232R-3V3-WE/768-1016-ND/1836394
-* Except the above doesn't fit. This should:
-** http://www.digikey.com/product-detail/en/SWR201-NRTN-S04-SA-WH/S9457-ND/2769602
-** http://www.digikey.com/product-detail/en/SWH201-NULN-S04-UU-WH/S9406-ND/2411374
-** 115200,8n1
-
-
-http://web.archive.org/web/20101221152953/http://plugapps.com/index.php5?title=Hardware:_Pogoplug_Pro
-
-
-
-Software:
-
-http://www.pogoplugged.com/forum/thread/14902/Pogoplug-Pro-U-Boot-Kernel-Sources/#11255
-
-http://pogoplug.com/opensource
-
-http://archlinuxarm.org/ (Platforms -> ARMv6 -> ~PogoPlug Pro/Video/V3)
-
-https://github.com/WarheadsSE/OX820-3.1-Linux
-
-
-Original images?:
-
-http://archlinuxarm.org/mirror/ce/
-
-http://download.pogoplug.com/opensource/#PRO
-
-SATA boot:
-
-http://archlinuxarm.org/forum/viewtopic.php?f=29&t=2146
-
-Stock boot parameters:
-<code brush="plain">
-/ # /usr/local/cloudengines/bin/blparam
-bootcmd=run boot_nand
-bootdelay=2
-baudrate=115200
-autoload=n
-netmask=255.255.0.0
-bootfile="uImage"
-kernflmode=s
-load_nand=nboot 60500000 0 200000
-load_nand2=nboot 60500000 0 800000
-boot=bootm 60500000
-boot_nand=run load_nand boot || run load_nand2 boot
-stdin=serial
-stdout=serial
-stderr=serial
-bootargs=root=ubi0:rootfs ubi.mtd=2,512 rootfstype=ubifs console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes
-ethaddr=see label on the bottom of the device
-cesvcid=see label on the bottom of the device, without hyphens
-ceboardver=PPV3
-serverip=192.168.1.20
-ipaddr=192.168.1.122
+Outside:
+
+* 4x USB2.0
+* 1x Gigabit Ethernet
+
+Inside:
+
+* OXNAS 7820 ARMv6 dual-core 700MHz
+* 128MB RAM
+* 128MB NAND flash
+* 1x SATA port, no PMP
+* JTAG is port HD5, but has no header: http://archlinuxarm.org/forum/viewtopic.php?f=29&t=1118#p6256
+** Need pinout!
+* Port J3 is most likely a serial port
+** http://web.archive.org/web/20101128072832/http://plugapps.com/images/f/fd/Pogoplug_Pro_Serial_Pinout.jpeg
+** http://search.digikey.com/us/en/products/51021-0400/WM1722-ND/242844?wt.mc_id=Dxn_US_T091_Catlink
+** http://search.digikey.com/us/en/products/TTL-232R-3V3-WE/768-1016-ND/1836394
+* Except the above doesn't fit. This should:
+** http://www.digikey.com/product-detail/en/SWR201-NRTN-S04-SA-WH/S9457-ND/2769602
+** http://www.digikey.com/product-detail/en/SWH201-NULN-S04-UU-WH/S9406-ND/2411374
+** 115200,8n1
+
+
+http://web.archive.org/web/20101221152953/http://plugapps.com/index.php5?title=Hardware:_Pogoplug_Pro
+
+
+
+Software:
+
+http://www.pogoplugged.com/forum/thread/14902/Pogoplug-Pro-U-Boot-Kernel-Sources/#11255
+
+http://pogoplug.com/opensource
+
+http://archlinuxarm.org/ (Platforms -> ARMv6 -> ~PogoPlug Pro/Video/V3)
+
+https://github.com/WarheadsSE/OX820-3.1-Linux
+
+
+Original images?:
+
+http://archlinuxarm.org/mirror/ce/
+
+http://download.pogoplug.com/opensource/#PRO
+
+SATA boot:
+
+http://archlinuxarm.org/forum/viewtopic.php?f=29&t=2146
+
+Stock boot parameters:
+<code brush="plain">
+/ # /usr/local/cloudengines/bin/blparam
+bootcmd=run boot_nand
+bootdelay=2
+baudrate=115200
+autoload=n
+netmask=255.255.0.0
+bootfile="uImage"
+kernflmode=s
+load_nand=nboot 60500000 0 200000
+load_nand2=nboot 60500000 0 800000
+boot=bootm 60500000
+boot_nand=run load_nand boot || run load_nand2 boot
+stdin=serial
+stdout=serial
+stderr=serial
+bootargs=root=ubi0:rootfs ubi.mtd=2,512 rootfstype=ubifs console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes
+ethaddr=see label on the bottom of the device
+cesvcid=see label on the bottom of the device, without hyphens
+ceboardver=PPV3
+serverip=192.168.1.20
+ipaddr=192.168.1.122
</code>
version 16
Outside:
- 4x USB2.0
- 1x Gigabit Ethernet
Inside:
- OXNAS 7820 ARMv6 dual-core 700MHz
- 128MB RAM
- 128MB NAND flash
- 1x SATA port, no PMP
JTAG is port HD5, but has no header:
http://archlinuxarm.org/forum/viewtopic.php?f=29&t=1118#p6256- Need pinout!
Port J3 is most likely a serial port
Except the above doesn't fit. This should:
http://web.archive.org/web/20101128072832/http://plugapps.com/images/f/fd/Pogoplug_Pro_Serial_Pinout.jpegSoftware:
http://www.pogoplugged.com/forum/thread/14902/Pogoplug-Pro-U-Boot-Kernel-Sources/#11255
http://pogoplug.com/opensource
http://archlinuxarm.org/ (Platforms -> ARMv6 -> PogoPlug Pro/Video/V3)
https://github.com/WarheadsSE/OX820-3.1-Linux
Original images?:
http://archlinuxarm.org/mirror/ce/
http://download.pogoplug.com/opensource/#PRO
SATA boot:
http://archlinuxarm.org/forum/viewtopic.php?f=29&t=2146
Stock boot parameters:
/ # /usr/local/cloudengines/bin/blparam bootcmd=run boot_nand bootdelay=2 baudrate=115200 autoload=n netmask=255.255.0.0 bootfile="uImage" kernflmode=s load_nand=nboot 60500000 0 200000 load_nand2=nboot 60500000 0 800000 boot=bootm 60500000 boot_nand=run load_nand boot || run load_nand2 boot stdin=serial stdout=serial stderr=serial bootargs=root=ubi0:rootfs ubi.mtd=2,512 rootfstype=ubifs console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes ethaddr=see label on the bottom of the device cesvcid=see label on the bottom of the device, without hyphens ceboardver=PPV3 serverip=192.168.1.20 ipaddr=192.168.1.122