Differences between version 3 and previous revision of CyberLeo/Scraps/POGO-P21.
Other diffs: Previous Major Revision, Previous Author
| Newer page: | version 3 | Last edited on Thursday, 15 December 2011 15:06:53 | by CyberLeo | Revert |
| Older page: | version 2 | Last edited on Thursday, 15 December 2011 14:42:26 | by CyberLeo | Revert |
@@ -4,8 +4,19 @@
* 1x Gigabit Ethernet
Inside:
+* 700MHz dual-core OXNAS ARMv6 core
+* 128MB RAM
+* 128MB NAND flash
* 1x SATA port, no PMP
* JTAG is port HD5, but has no header: http://archlinuxarm.org/forum/viewtopic.php?f=29&t=1118#p6256
-* Port J3 is most likely a serial port
+* Port J3 is most likely a serial port: http://web.archive.org/web/20101128072832/http://plugapps.com/images/f/fd/Pogoplug_Pro_Serial_Pinout.jpeg
* Need pinouts!
+
+http://web.archive.org/web/20101221152953/http://plugapps.com/index.php5?title=Hardware:_Pogoplug_Pro
+
+
+
+Software:
+
+http://www.pogoplugged.com/forum/thread/14902/Pogoplug-Pro-U-Boot-Kernel-Sources/#11255
version 3
Outside:
- 4x USB2.0
- 1x Gigabit Ethernet
Inside:
- 700MHz dual-core OXNAS ARMv6 core
- 128MB RAM
- 128MB NAND flash
- 1x SATA port, no PMP
- JTAG is port HD5, but has no header:
http://archlinuxarm.org/forum/viewtopic.php?f=29&t=1118#p6256 - Port J3 is most likely a serial port: http://web.archive.org/web/20101128072832/http://plugapps.com/images/f/fd/Pogoplug_Pro_Serial_Pinout.jpeg
- Need pinouts!
http://web.archive.org/web/20101128072832/http://plugapps.com/images/f/fd/Pogoplug_Pro_Serial_Pinout.jpegSoftware:
http://www.pogoplugged.com/forum/thread/14902/Pogoplug-Pro-U-Boot-Kernel-Sources/#11255