CDNWiki - View Source: CyberLeo/Scraps/POGO-P21

Outside:

* 4x USB2.0
* 1x Gigabit Ethernet

Inside:

* OXNAS 7820 ARMv6 dual-core 700MHz
* 128MB RAM
* 128MB NAND flash
* 1x SATA port, no PMP
* JTAG is port HD5, but has no header: http://archlinuxarm.org/forum/viewtopic.php?f=29&t=1118#p6256
** Need pinout!
* Port J3 is most likely a serial port
** http://web.archive.org/web/20101128072832/http://plugapps.com/images/f/fd/Pogoplug_Pro_Serial_Pinout.jpeg
** http://search.digikey.com/us/en/products/51021-0400/WM1722-ND/242844?wt.mc_id=Dxn_US_T091_Catlink
** http://search.digikey.com/us/en/products/TTL-232R-3V3-WE/768-1016-ND/1836394
* Except the above doesn't fit. This should:
** http://www.digikey.com/product-detail/en/SWR201-NRTN-S04-SA-WH/S9457-ND/2769602
** http://www.digikey.com/product-detail/en/SWH201-NULN-S04-UU-WH/S9406-ND/2411374
** 115200,8n1


http://web.archive.org/web/20101221152953/http://plugapps.com/index.php5?title=Hardware:_Pogoplug_Pro



Software:

http://www.pogoplugged.com/forum/thread/14902/Pogoplug-Pro-U-Boot-Kernel-Sources/#11255

http://pogoplug.com/opensource

http://archlinuxarm.org/ (Platforms -> ARMv6 -> ~PogoPlug Pro/Video/V3)

https://github.com/WarheadsSE/OX820-3.1-Linux


Original images?:

http://archlinuxarm.org/mirror/ce/

http://download.pogoplug.com/opensource/#PRO

SATA boot:

http://archlinuxarm.org/forum/viewtopic.php?f=29&t=2146

Stock boot parameters:
<code brush="plain">
/ # /usr/local/cloudengines/bin/blparam
bootcmd=run boot_nand
bootdelay=2
baudrate=115200
autoload=n
netmask=255.255.0.0
bootfile="uImage"
kernflmode=s
load_nand=nboot 60500000 0 200000
load_nand2=nboot 60500000 0 800000
boot=bootm 60500000
boot_nand=run load_nand boot || run load_nand2 boot
stdin=serial
stdout=serial
stderr=serial
bootargs=root=ubi0:rootfs ubi.mtd=2,512 rootfstype=ubifs console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes
ethaddr=see label on the bottom of the device
cesvcid=see label on the bottom of the device, without hyphens
ceboardver=PPV3
serverip=192.168.1.20
ipaddr=192.168.1.122
</code>