Outside:
- 4x USB2.0
- 1x Gigabit Ethernet
Inside:
- OXNAS 7820 ARMv6 dual-core 700MHz
- 128MB RAM
- 128MB NAND flash
- 1x SATA port, no PMP
JTAG is port HD5, but has no header:
http://archlinuxarm.org/forum/viewtopic.php?f=29&t=1118#p6256- Need pinout!
Port J3 is most likely a serial port
Except the above doesn't fit. This should:
http://web.archive.org/web/20101128072832/http://plugapps.com/images/f/fd/Pogoplug_Pro_Serial_Pinout.jpegSoftware:
http://www.pogoplugged.com/forum/thread/14902/Pogoplug-Pro-U-Boot-Kernel-Sources/#11255
http://pogoplug.com/opensource
http://archlinuxarm.org/ (Platforms -> ARMv6 -> PogoPlug Pro/Video/V3)
https://github.com/WarheadsSE/OX820-3.1-Linux
Original images?:
http://archlinuxarm.org/mirror/ce/
http://download.pogoplug.com/opensource/#PRO
SATA boot:
http://archlinuxarm.org/forum/viewtopic.php?f=29&t=2146
Stock boot parameters:
/ # /usr/local/cloudengines/bin/blparam bootcmd=run boot_nand bootdelay=2 baudrate=115200 autoload=n netmask=255.255.0.0 bootfile="uImage" kernflmode=s load_nand=nboot 60500000 0 200000 load_nand2=nboot 60500000 0 800000 boot=bootm 60500000 boot_nand=run load_nand boot || run load_nand2 boot stdin=serial stdout=serial stderr=serial bootargs=root=ubi0:rootfs ubi.mtd=2,512 rootfstype=ubifs console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes ethaddr=see label on the bottom of the device cesvcid=see label on the bottom of the device, without hyphens ceboardver=PPV3 serverip=192.168.1.20 ipaddr=192.168.1.122