CDNWiki - View Source: KnowledgeBase/DOSBoot

Note: You are viewing an old version of this page. View the current version.
There are two ways of creating a bootable DOS filesystem:
* [Using MS-DOS and 'sys' in ~DosBox|#DosBox]
* [Using FreeDOS and 'sys-freedos.pl'|#sys-freedos.pl]

The methods documented herein will create a 2.88MB boot floppy (as 1.44MB often hasn't enough space to hold the BIOS updates for modern motherboards). Since actual 2.88MB floppy drives (and media) are difficult to find, these images are primarily useful with [Memdisk|http://syslinux.zytor.com/wiki/index.php/MEMDISK]. If you need a different size filesystem, just adjust the dd or truncate commands as appropriate. Just make sure that the final image is a multiple of 512 bytes in length.

<b>Note that using Memdisk may not work with certain BIOS update utilities!</b>

----

!! #[DosBox]

* Make sure that you have a copy of ~DosBox and a copy of a Windows 98 MS-DOS boot floppy.

* Create a directory to hold the disk images, so that you don't lose them
<verbatim>
mkdir ~/boot
cd ~/boot
</verbatim>

* Create a blank 2.88MB floppy image and format as FAT12
<verbatim>
dd if=/dev/zero of=floppy.img bs=1024 count=2880
mkdosfs -vvv floppy.img
</verbatim>

[Upload:CyberLeo/2.88Boot-1.png]

* Launch ~DosBox
<verbatim>
dosbox
</verbatim>

* Within ~DosBox, mount the directory containing the images, and issue a boot command to boot the Windows 98 MS-DOS boot floppy
<verbatim>
mount c ~/boot
c:
boot win98s~1.img floppy.img
</verbatim>

[Upload:CyberLeo/2.88Boot-2.png]
[Upload:CyberLeo/2.88Boot-3.png]

* After Windows 98 MS-DOS boots, you will be dropped to a DOS prompt. Copy the system over to the B: disk as usual
<verbatim>
sys b:
</verbatim>

[Upload:CyberLeo/2.88Boot-4.png]
[Upload:CyberLeo/2.88Boot-5.png]

* The new disk image should now be bootable, and fully compatible with memdisk (you don't really have a real 2.88MB floppy drive lying around, do you?)

----

!! #[sys-freedos.pl]

You will need
* mtools
* mkdosfs from dosfstools
* kernel.sys and command.com from the [FreeDOS distribution|http://www.freedos.org/freedos/files/] (fdbasecd.iso:/freedos/setup/odin)
* [sys-freedos.pl|KnowledgeBase/Scripts/sys-freedos.pl] from the [sys-freedos|http://www.ibiblio.org/pub/micro/pc-stuff/freedos/files/dos/sys/sys-freedos-linux/] tarball
** This requires perl, and probably also nasm to build the boot block

<code brush="bash">
# Make a file
truncate -s $(( 2880 * 1024 )) floppy.img

# Add FAT12 filesystem
mkdosfs -vvF12 -n DOSBOOTFLOPPY floppy.img

# Copy in the FreeDOS files
mcopy -i floppy.img kernel.sys command.com ::

# Hide them, for consistency
mattrib -i floppy.img +H +S ::kernel.sys ::command.com

# Install boot block
sys-freedos.pl --disk=floppy.img
</code>

* The new disk image should now be bootable