FindPage
View Source:
KnowledgeBase/FreeBSD/Pulsed
Note:
You are viewing an old version of this page.
View the current version.
http://brainmurmurs.com/products/pulse/download.php Pulsed's installer is hopelessly linux-centric, and makes icky (and mostly invalid) assumptions about the layout of the system. The sources do compile and run on FreeBSD 6.x, though. Just ignore all their 'convenience' scripts. * Prerequisites (all available through ports or packages) ** Bison ** GNU Make ** Python * Fetch the sources and build them. The ./configure line is identical to that from linuxConfig.sh, except without the custom CFLAGS. <verbatim> tar zxvf pulse-gateway-1.0-src.tgz cd pulse-gateway ./configure --disable-lzo --without-tun --disable-ssl --prefix=/usr gmake </verbatim> * The most important files to worry about are: <verbatim> pulse-gateway/resources/createPulseConf.py pulse-gateway/resources/pulse.header pulse-gateway/pulsed </verbatim> * Install and configure packetfilter to NAT from 10.0.0.0/8 to your uplink. * Enable gateway in rc.conf * Install pulsed into /usr/sbin and secure to root:wheel (750) because it will not work under a mortal UID (no perms to modify routing table). * Patch createPulseConf.py to fix a stale route issue: <verbatim> --- /etc/pulsed/createPulseConf.py.orig Thu Feb 8 04:56:17 2007 +++ /etc/pulsed/createPulseConf.py Thu Feb 8 03:50:06 2007 @@ -1,4 +1,4 @@ -#!/usr/bin/python +#!/usr/local/bin/python # Copyright (C) 2006 by Brain Murmurs, Incorporated # This software is furnished under a license and may be used and copied only # in accordance with the terms of such license and with the inclusion of the @@ -61,6 +61,7 @@ print " };" print "" print " down {" + print " route \"delete -net 10.%s.%s.0 -netmask 255.255.255.0\";" % (bsubnet, addr) print " };" print "}" print "" </verbatim> * Patch options.pulse to remove options FreeBSD pppd doesn't recognize: <verbatim> --- /etc/ppp/options.pulse.orig Thu Feb 8 04:56:17 2007 +++ /etc/ppp/options.pulse Thu Feb 8 03:37:23 2007 @@ -1,5 +1,5 @@ debug -dump +#dump lock #vj-max-slots 16 ipparam 10.3.0.0 @@ -8,7 +8,7 @@ mtu 8192 mru 8192 #kdebug 7 -logfile /var/log/system.log +#logfile /var/log/system.log bsdcomp 15,15 idle 60 name boba </verbatim> (It would also be a good thing at this point to change the ms-dns IP addresses to DNS servers that aren't part of the public Pulse network) * Install patched createPulseConf.py into /etc/pulsed (700) * Install pulse.header into /etc/pulsed (600) * Install patched options.pulse into /etc/ppp (600) * Create /etc/pulsed/pulse-users.csv (600) and populate with users, one per line: <verbatim> user,pass </verbatim> * cd /etc/pulsed && ./createPulseConf.py - This will rebuild /etc/pulsed/pulsed.conf and /etc/ppp/chap-secrets .. Do this every time you modify pulse.header or pulse-users.csv * Create a simple startup script <verbatim> --- /dev/null Thu Feb 8 05:00:00 2007 +++ /usr/local/etc/rc.d/pulsed Thu Feb 8 04:42:39 2007 @@ -0,0 +1,48 @@ +#!/bin/sh +# +# PROVIDE: pulsed +# REQUIRE: DAEMON +# KEYWORD: shutdown +# +# Add the following lines to /etc/rc.conf to enable postfix: +# pulsed_enable (bool): Set it to "YES" to enable pulsed. +# Default is "NO". +# pulsed_pidfile (path): Set full path to pulsed.pid. +# Default is "/var/run/pulsed.pid". +# + +. /etc/rc.subr + +name="pulsed" +rcvar=`set_rcvar` + +load_rc_config $name + +: ${pulsed_enable="NO"} +: ${pulsed_pidfile="/var/run/pulsed.pid"} + +start_cmd=${name}_start +stop_cmd=${name}_stop +reload_cmd=${name}_reload +extra_commands="reload" + +pidfile=${pulsed_pidfile} + +pulsed_start() { + /usr/sbin/pulsed -s -f /etc/pulsed/pulsed.conf +} + +pulsed_stop() { + killall -TERM pulsed +} + +pulsed_reload() { + killall -HUP pulsed +} + +run_rc_command "$1" </verbatim> * Enable execution at startup by inserting 'pulsed_enable="YES"' into rc.conf. I think that's everything... -CyberLeo
