Load visor.ko

Palm config:

  • In Preferences -> Connection

    • Choose 'Cradle/Cable'

      • Connect to: PC
      • Via: Cradle/Cable

    • Details:

      • Speed: 115,200 bps
      • Flow Ctl: Automatic

  • In Preferences -> Network

    • Service: Windows RAS
    • User Name: <blank>
    • Password: <blank>
    • Connection: Cradle/Cable

    • Details

      • Connection type: PPP
      • Idle timeout: 1 Minute
      • Query DNS: yes
      • IP Address: Automatic

Plug it in, hit connect. It will not attach as a USB serial device until you try to connect.

In a shell, figure out what ttyUSB device it just grabbed. (Hint: It'll probably grab two; you want the higher numbered one)

echo 1 > /proc/sys/net/ipv4/ip_forward
echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp
/usr/sbin/pppd /dev/ttyUSB3 115200 10.224.23.33:10.224.23.34
echo 0 > /proc/sys/net/ipv4/conf/eth0/proxy_arp
echo 0 > /proc/sys/net/ipv4/ip_forward