Differences between version 9 and previous revision of SiloBoM.
Other diffs: Previous Major Revision, Previous Author
| Newer page: | version 9 | Last edited on Monday, 16 March 2020 11:04:08 | by CyberLeo | Revert |
| Older page: | version 8 | Last edited on Sunday, 8 March 2020 11:15:59 | by CyberLeo | Revert |
@@ -19,8 +19,10 @@
| Y | Dual USB 2.0 panel-mount pigtail | [[https://www.aliexpress.com/item/32863111656.html|Aliexpress]] | 1 | $1.58 | 30cm
| Y | USB 3.0 panel-mount pigtail | [[https://www.aliexpress.com/item/32233222127.html|Aliexpress]] | 1 | $3.39 |
| Y | USB-C panel-mount pigtail | [[https://www.aliexpress.com/item/32844771405.html|Aliexpress]] | 1 | $8.88 |
| Y | M3 Nylon Hex Standoff | [[https://smile.amazon.com/gp/product/B07D7828LC/|Amazon]] | 1 | $11.99 | Only need like four screws, four nuts, and four standoffs to hold the SBC onto a mounting board.
+| Y | JST-XHP connector for power | [[https://smile.amazon.com/gp/product/B07CTH46S7/|Amazon]] | 1 | $16.54 | Only need one four-position connector and crimps.
+| Y | DuPont connector for serial & GPIO | [[https://smile.amazon.com/gp/product/B07CTHCG5T/|Amazon]] | 1 | $13.98 | Dunno how many of these will be needed just yet.
?>
----
version 9
| Opt | Item | Link | # | Price | Notes |
| N | ROCKPro64 4GB Single Board Computer |  Pine64 Store |
1 | $79.99 | |
| N | 128GB eMMC Module | Pine64 Store |
1 | $54.95 | They offer 64, 32, and 16 gigabyte modules for cheaper |
| N | USB Adapter for eMMC Module | Pine64 Store |
1 | $4.99 | Only needed to program the eMMC for the first time |
| Y | Sony 64GB Micro SDXC Class 10 UHS-1 Memory Card | Amazon |
1 | $14.07 | Removable backup storage for onboard config |
| N | ROCKPro64 20mm Mid Profile Heatsink | Pine64 Store |
1 | $3.29 | The grapheme heatsink is insufficient and causes overheat-reboots |
| Y | Fan for ROCKPro64 20mm Mid Profile Heatsink | Pine64 Store |
1 | $2.99 | |
| Y | Pine64 Store |
1 | $3.99 | Needs modification, I don't know why | |
| Y | Pine64 Store |
1 | $1.99 | If you want to troubleshoot the board via serial | |
| N | LSISAS 9207-8i HBA | Amazon |
1 | $82.48 | Can be had cheaper used on eBay, just make sure to thoroughly test! |
| N | Copystars 7-bay Case | Amazon |
1 | $89.00 | |
| N | Kingwin Aluminum Four Bay Hot Swap Mobile Rack | Amazon |
2 | $79.99 | Look around, maybe cheaper elsewhere |
| N | 2-pack CableCreation Mini SAS 36Pin (SFF-8087) Male to 4 SATA 7Pin Female, 0.5M | Amazon |
1 | $13.99 | Or get the 5-pack and have extras |
| N | Molex to 5.5-2.1 barrel jack power cable | 1 | I had to build this | ||
| N | Right-angle RJ45 panel-mount pigtail | Aliexpress |
1 | $2.20 | 0.3m, 90degree to Up |
| Y | Right-angle HDMI adapter | Aliexpress |
1 | $0.90 | |
| Y | HDMI panel-mount pigtail | Aliexpress |
1 | $1.48 | 0.3m |
| Y | Dual USB 2.0 panel-mount pigtail | Aliexpress |
1 | $1.58 | 30cm |
| Y | USB 3.0 panel-mount pigtail | Aliexpress |
1 | $3.39 | |
| Y | USB-C panel-mount pigtail | Aliexpress |
1 | $8.88 | |
| Y | M3 Nylon Hex Standoff | Amazon |
1 | $11.99 | Only need like four screws, four nuts, and four standoffs to hold the SBC onto a mounting board. |
| Y | JST-XHP connector for power | Amazon |
1 | $16.54 | Only need one four-position connector and crimps. |
| Y | DuPont connector for serial & GPIO |
Amazon |
1 | $13.98 | Dunno how many of these will be needed just yet. |
Initial power characterization:
- Supply: 4.6W
- +Fan: 7.1W
- +1st enclosure: 9.5W
- +2nd enclosure: 12.3W
- +SBC: 16.5W
- +HBA: 26.2W
- +8 disks: 64.4W
- +spun down: 36.5W
- +stress -c6: 42.6W
- +SBCfan: 43.7W
Supply: 4.6W
Casefan: 2.5W
Enclosures: 5.2W for both
SBC
- Quiescent: 4.2W
- Full CPU: 10.3W
SBCfan: 1.1W
HBA: 9.6W
Disks
- Quiescent: 38.3W
- Standby: 10.4W
Put this onto pins 19 and 21 for LCDd? https://www.crystalfontz.com/product/cfa635tmlkl-20x4-uart-display-module-text
Turn some GPIO pins into LEDs to emulate LAN activity lights:
/ {
leds {
lan-link-led {
label = "lan:link";
default-state = "off";
gpios = <&gpio1 RK_C4 GPIO_ACTIVE_HIGH>; // Pin 3 on Pi-2 Connector
}
lan-act-led {
label = "lan:activity";
default-state = "off";
gpios = <&gpio1 RK_C5 GPIO_ACTIVE_HIGH>; // Pin 5 on Pi-2 Connector
}
}
}